Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on Ford S Max

Model: Ford S Max MK 1 - Years 2006-2016
Part: Headlight bulb

Open the bonnet and insert the support rod. Disconnect the main connector located behind the affected headlamp using a small flat screwdriver. Remove the two screws securing the lamp to the bodywork and extract it. Position yourself on a workbench and remove the rear cover of the affected lamp, lift the metal clip and extract the burnt-out bulb. Insert the new bulb and secure it with the metal clip, refit the rubber rear cover and proceed to secure the lamp in its designated place by screwing in the screws and reconnecting the connector.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light on a Ford S-Max
Removing the Rear Light on a Ford S-Max
Ford S Max (2006-2016 / MK 1) Today, you will see how to remove the rear light and replace the bulbs on a Ford S-Max by following these simple steps. First, open the boot and remo…
Removing Front Door Panel on Ford S-Max
Removing Front Door Panel on Ford S-Max
Ford S Max (2006-2016 / MK 1) In today's video, you will learn how to remove the front door panel on a first series Ford S-Max. First, open the front door and use a plastic lever …
Removing the Rear Light on Ford S Max
Removing the Rear Light on Ford S Max
Ford S Max (2006-2016 / MK 1) Let’s look at removing the rear light on the Ford S Max. Lift the tailgate that closes the boot, then unscrew the securing screws located at the back…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos