Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Door Panel on Ford S-Max

Model: Ford S Max MK 1 - Years 2006-2016
Part: Door trim panel

In today's video, you will learn how to remove the front door panel on a first series Ford S-Max. First, open the front door and use a plastic lever to remove the cover of the grab handle, prying it from the sides; then unscrew the screws found on both the opening handle and the sides of the door itself. Next, unscrew the additional screws located at the bottom of the door panel and then start to detach the panel from the sides at several points; finally, remove the door panel by disconnecting the handle cable!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light on Ford S Max
Removing the Rear Light on Ford S Max
Ford S Max (2006-2016 / MK 1) Let’s look at removing the rear light on the Ford S Max. Lift the tailgate that closes the boot, then unscrew the securing screws located at the back…
Where is the fuel filter located on the Ford S Max and how do you replace it?
Where is the fuel filter located on the Ford S Max and how do you replace it?
Ford S Max (2006-2016 / MK 1) The fuel filter on the Ford S Max is located inside the front hood of the vehicle, specifically near the fuel pump and engine. If necessary, the repl…
How to Remove the Glove Compartment on the Ford S-Max
How to Remove the Glove Compartment on the Ford S-Max
Ford S Max (2006-2016 / MK 1) In this brief guide, you will find instructions on how to remove the glove compartment from the dashboard of the Ford S-Max second series, following …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos