Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Tail light bulb

Before you start, open the tailgate of your Ford Ecosport. Begin by moving the side carpet in the boot, then unscrew and remove the screw that secures the rear light to its housing. Next, close the boot lid, then extract the light and disconnect the associated electrical connector. By doing this, you will reach the bulb holder. Proceed by unscrewing and removing the screws that secure the bulb holder to the rear light, then unclip and extract the bulb holder itself. At this point, you will have access to the blown bulb, which you can unclip and remove, successfully completing the disassembly. To install the new bulb, follow these steps in reverse, and you will have completed the replacement.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Ford Ecosport?
How to Replace the Rear Light Bulb on a Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) To replace the rear light bulb on a Ford Ecosport, open the rear tailgate to access the side screws of the corresponding light. These screws can be l…
How to Change the Rear Headlamp Bulb on a Ford Ecosport
How to Change the Rear Headlamp Bulb on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) How to change the rear headlamp bulb on a Ford Ecosport? This operation is very simple; follow these steps to remove the headlamp. Open the boot lid;…
How to Replace the Rear Light Bulbs on the Ford Ecosport
How to Replace the Rear Light Bulbs on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) In this brief and simple guide, you will learn how to remove and replace the rear light bulb on the Ford Ecosport. First, open the boot lid and start…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos