Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Tensioner Pulley on the Ford Focus MK1

Model: Ford Focus MK 1 - Years 1998-2004

In today's video, follow the main steps to remove and replace the tensioner pulley of the drive belt on the first series Ford Focus. First, open the bonnet and start by removing the coolant reservoir; then also remove the power steering reservoir by unscrewing the bracket screws. At this point, loosen the belt tensioner to remove the belt; now unscrew the central nut of the tensioner to remove it and replace it with the new one, following the video to the end!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on Ford Focus
Replacing the Timing Belt on Ford Focus
Ford Focus (1998-2004 / MK 1) Disassembling the timing belt on a Ford Focus. Lift the bonnet of the engine bay. Remove the engine cover panel and the belt cover panel. Take out th…
How to Remove the Timing Belt from a Ford Focus
How to Remove the Timing Belt from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Remove the timing belt from a Ford Focus. Lift the car on a column lift; remove the front wheel and the right wheel arch liner. Once these operations…
How to Replace the Auxiliary Belt on a Ford Focus 1.6 TDCi?
How to Replace the Auxiliary Belt on a Ford Focus 1.6 TDCi?
Ford Focus (2011-2018 / MK 3) To replace the auxiliary belt on a Ford Focus 1.6 TDCi, access the left side of the engine block next to the coolant reservoir. Here, you will find t…

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos