Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Auxiliary Belt on a Ford Focus 1.6 TDCi?

Model: Ford Focus MK 3 - Years 2011-2018
Part: V-belt

To replace the auxiliary belt on a Ford Focus 1.6 TDCi, access the left side of the engine block next to the coolant reservoir. Here, you will find the tensioner, which can be moved by loosening its securing bolt. Once the bolt is loosened, you can slide the belt off the pulleys and replace it with the appropriate spare part. After the new belt is fitted, reposition the tensioner and close the car's bonnet.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides the main instructions on how to dismantle and replace the timing belt on a Ford Focus 1.6 TDCi. First, raise the vehicle and begi…
Ford Focus (2011-2018 / MK 3) Today's main instructions will show us the procedure for disassembling and replacing the timing belt on the Ford Focus 2.0 TDCi. First, let's open th…
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the timing belt of the Ford Focus 2.0 TDCi, you need to open the hood and then loosen the screws that hold the corresponding front wheel: …

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos