Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : V-belt

Ford Focus - V-belt

Ford Focus (1998-2004 / MK 1)
How to change the drive belt on a Ford Focus MK1 version
Let's see how to change the serpentine belt on a Ford Focus MK1; first, we need to lift the car, placing it on at least two jack stands, so that we can be sure …read all…
Posted on 10 November 2023 by ScegliAuto
Ford Focus (2011-2018 / MK 3)
How to replace the alternator belt in Ford Focus?
As we can see in this tutorial, replacing the alternator belt in your Ford Focus is an extremely simple and fast operation. To do this, in addition to the …read all…
Posted on 5 April 2023 by ScegliAuto
Ford Focus (2011-2018 / MK 3)
How to replace the V-belt on the Ford Focus 1.6 TDCi?
To be able to replace the V-belt of the Ford Focus 1.6 TDCi, you need to go to the left side of the engine block, next to the antifreeze reservoir. Here, the …read all…
Posted on 23 August 2022 by ScegliAuto
Ford Focus (2011-2018 / MK 3)
How to replace the alternator belt on the Ford Focus 3 1.6 TDCI
Let's find out in this guide how to remove and replace the service or alternator belt on the Ford Focus third series, with 1.6 TDCI engine. First of all, we …read all…
Posted on 16 March 2024 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Auxiliary belt replacement instructions
The replacement of the auxiliary belt is very simple to carry out but it is important to take note of the passage through the various pulleys to proceed more …read all…
Posted on 23 August 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (5) Alternator (21) Loudspeaker (6) Shock absorbers (6) Antenna (9) Air conditioning (8) Car stereo (61) Anti roll bar (1) Roof Rack Bars (1) Battery (28) Coil (2) Air Vents (5) Bushings (2) Arm (1) Grille (1) Gearbox (2) Spark plugs (15) Glow plugs (3) Bodywork (8) Glove box (1) Control unit (8) Key (43) Locking the trunk (2) Timing belt (30) V-belt (5) Air conditioning (3) Air conditioning controls (4) -board computer (27) Checks and maintenance (146) Oil pan (1) Throttle body (1) Dashboard (15) Gearshift gaiter (1) Bearing (7) Brake discs (8) Rear bench seat (1) Side indicator light (2) Headlight (31) Tail light (11) Fog lights (8) Air filter (23) Cabin air filter (24) Petrol filter (10) Diesel filter (28) Oil filter (8) Hand brake (10) Clutch (7) Grille (6) Injectors (8) Window lift switch (2) Reverse gear switch (1) Accessory Kit (12) Light bulb (22) Side turn signal light bulb (9) Headlight bulb (37) Rear light bulb (26) Interior lights ceiling light bulb (12) Antifreeze liquid (3) Dashboard light (3) License plate light (4) Third brake light (3) Handle (18) Mask (1) Engine (17) Window motor (6) Starter motor (13) Engine oil (15) Power steering oil (2) Door panel (36) Windshield (1) Front bumper (17) Rear bumper (13) Brake pads (20) Hydraulic pistons (3) Tires (7) Gear Shift Knob (14) Pump (11) Fuel pump (30) Door (7) Push button (4) Window lift button (4) Instrument cluster (42) Radiator (9) Passenger compartment heating radiator (7) (1) Wheel (5) Fuse box (75) Seat (24) Drive shaft (2) Crankshaft RPM sensor (3) Coolant temperature sensor (1) Parking sensors (1) Lock (12) Lambda sensor (5) Suspensions (3) Outside rearview mirror (42) Interior rearview mirror (4) Engine mount (9) Drums and shoes (6) Windscreen wipers (19) Thermostat (10) Engine head (3) Transmission (1) Central tunnel (2) Turbine (7) Valve (3) EGR valve (5) Interior blower (18) Side window (6) Steering wheel (7)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos