Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Anti-roll bar

Ford Focus - Anti-roll bar

Anti-roll Bar Ford Focus (1998-2004 / mk 1)

Ford Focus (1998-2004 / MK 1)
Ford Focus Mk1: how to install a DIY rear stabilizer bar
On the Ford Focus, the installation of the rear stabilizer bar is carried out with the vehicle stationary and safely, working on the rear axle with access to …Read all…
Posted on 3 December 2025 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Replacement of Stabiliser Bar Links
The stabiliser bar or anti-roll bar is connected to the front suspension via rods known as links, which have spherical joints at their ends: these joints tend …Read all…
Posted on 17 February 2026 by ScegliAuto
Cigarette lighter (3) Airbag (12) Alternator (25) Speaker (8) Shocks (6) Antenna (10) Air conditioning (10) Car stereo (59) Anti-roll bar (2) Roof rack bars (1) Battery (29) Ignition coil (2) Air vents (5) Bushings (2) Control arm (2) Grille (1) Transmission (12) Spark plugs (17) Glow plugs (3) Body (22) Glove compartment (1) Control unit (7) Key (79) Trunk lock (2) Timing belt (47) V-belt (5) Air conditioner (3) A/C controls (5) Onboard computer (14) Checks and maintenance (96) Oil pan (1) Throttle body (1) Dashboard (15) Shifter boot (2) Bearing (7) Brake rotors (8) Rear bench seat (1) Side marker light (2) Headlight (47) Tail light (23) Fog lights (12) Air filter (30) Cabin air filter (31) Fuel filter (11) Diesel fuel filter (37) Oil filter (8) Parking brake (17) Clutch (11) Grille (7) Fuel injectors (14) Window switch (2) Reverse light switch (1) Accessory kit (12) Light bulb (26) Side marker bulb (10) Headlight bulb (51) Tail light bulb (37) Interior dome light bulb (13) Antifreeze coolant (5) Instrument panel light (3) License plate light (5) (3) Handle (26) Trim cover (1) Engine (17) Power window motor (7) Starter motor (17) Engine oil (13) Power steering fluid (3) Clock (19) Door trim panel (43) Windshield (1) Front bumper (18) Rear bumper (17) Brake pads (21) Hydraulic pistons (2) Tires (1) Shift knob (20) Pump (13) Fuel pump (33) Car door (11) Push button (4) Power window switch (4) Instrument cluster (15) Radiator (13) Heater core (8) (1) Wheel (7) Fuse box (130) Seat (29) Axle shaft (2) Crankshaft position sensor (3) Engine coolant temperature sensor (3) Parking sensors (1) Door lock (13) Oxygen sensor (6) Suspension system (3) Side mirror (49) Rearview mirror (5) Warning light – error code (74) Tire pressure warning light (79) Service warning light (131) Manufacturer emblem (1) Engine mount (9) Brake drums and shoes (6) Fuel cap (5) Windshield wipers (26) Thermostat (10) Cylinder head (3) Drivetrain (1) Center console tunnel (3) Turbocharger (8) Windshield washer nozzle (1) Valve (3) EGR valve (10) Blower motor (20) Side window (8) Steering wheel (9)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos