Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Lock

Ford Focus - Lock

Ford Focus (2004-2011 / MK 2, Focus2)
How do you replace the door lock of the Ford Focus?
The replacement of the door lock on the Ford Focus is done by opening the corresponding door, so that the circular cover located on the left side can be …read all…
Posted on 13 August 2023 by ScegliAuto
Ford Focus (2011-2018 / MK 3)
How do you replace the Ford Focus door lock?
In order to replace the Ford Focus door lock, you need to pry with an object, so that you can detach the window regulator button and the protective cover in …read all…
Posted on 3 December 2022 by ScegliAuto
Ford Focus (2004-2011 / MK 2, Focus2)
How to replace the Ford Focus Mk2 engine compartment lock
This guide shows you how to replace the Ford Focus Mk2 engine compartment lock. The first operation to be performed is to unscrew the two 10 mm bolts which …read all…
Posted on 22 December 2022 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Removing the Ford Focus MK1 front door lock module
Let's see in this video how to remove the front door lock of a Ford Focus first series, following these simple instructions. First we go to open the front …read all…
Posted on 27 March 2024 by ScegliAuto
Ford Focus (2004-2011 / MK 2, Focus2)
How to replace the Ford Focus lock cylinder
In this video we can see how it is possible to replace the door lock of the Ford Focus mk 2 without too many problems. First we have to prepare all the …read all…
Posted on 12 March 2024 by ScegliAuto
Ford Focus (2011-2018 / MK 3)
How to remove the lock actuator on the Ford Focus MK3
In this video tutorial we will see how to remove and replace the front door lock actuator on the Ford Focus third series, but also on the C-max. First we open …read all…
Posted on 4 March 2024 by ScegliAuto
Ford Focus (2004-2011 / MK 2, Focus2)
Ford Focus lock cylinder removal
In this video tutorial we will see how to remove the door lock cylinder of a Ford Focus third series. First we open the door and we go to disassemble its …read all…
Posted on 22 February 2024 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
How to remove the tailgate lock on a Ford Focus
How do you remove the tailgate lock on a Ford Focus? Let's see how to disassemble it. We open and lift the tailgate of our car; with a screwdriver we unscrew …read all…
Posted on 14 November 2023 by ScegliAuto
Ford Focus (2004-2011 / MK 2, Focus2)
How to open the front hood of a Ford Focus
The opening of the front hood on many Ford models is not done through the classic lever located at the bottom left on the driver's side but the vehicle key is …read all…
Posted on 16 September 2023 by ScegliAuto
Ford Focus (2011-2018 / MK 3)
Removing the rear lid lock
In order to remove the rear lid lock, it is first necessary to remove the plastic cover that covers the inside of the tailgate; once the hood has been opened, …read all…
Posted on 7 September 2023 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Right rear lock operation
The video describes the operation of the right rear door lock: it is a fairly complex mechanism that integrates, in addition to the central locking drive …read all…
Posted on 22 August 2023 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Front hood opening instructions
If you have never owned a Ford, at the first need to open the front hood, perhaps even for a trivial check of the water and oil level, you will be amazed not …read all…
Posted on 19 August 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (5) Alternator (21) Loudspeaker (6) Shock absorbers (6) Antenna (9) Air conditioning (8) Car stereo (61) Anti roll bar (1) Roof Rack Bars (1) Battery (28) Coil (2) Air Vents (5) Bushings (2) Arm (1) Grille (1) Gearbox (2) Spark plugs (15) Glow plugs (3) Bodywork (8) Glove box (1) Control unit (8) Key (43) Locking the trunk (2) Timing belt (30) V-belt (5) Air conditioning (3) Air conditioning controls (4) -board computer (27) Checks and maintenance (146) Oil pan (1) Throttle body (1) Dashboard (15) Gearshift gaiter (1) Bearing (7) Brake discs (8) Rear bench seat (1) Side indicator light (2) Headlight (31) Tail light (11) Fog lights (8) Air filter (23) Cabin air filter (24) Petrol filter (10) Diesel filter (28) Oil filter (8) Hand brake (10) Clutch (7) Grille (6) Injectors (8) Window lift switch (2) Reverse gear switch (1) Accessory Kit (12) Light bulb (22) Side turn signal light bulb (9) Headlight bulb (37) Rear light bulb (26) Interior lights ceiling light bulb (12) Antifreeze liquid (3) Dashboard light (3) License plate light (4) Third brake light (3) Handle (18) Mask (1) Engine (17) Window motor (6) Starter motor (13) Engine oil (15) Power steering oil (2) Door panel (36) Windshield (1) Front bumper (17) Rear bumper (13) Brake pads (20) Hydraulic pistons (3) Tires (7) Gear Shift Knob (14) Pump (11) Fuel pump (30) Door (7) Push button (4) Window lift button (4) Instrument cluster (42) Radiator (9) Passenger compartment heating radiator (7) (1) Wheel (5) Fuse box (75) Seat (24) Drive shaft (2) Crankshaft RPM sensor (3) Coolant temperature sensor (1) Parking sensors (1) Lock (12) Lambda sensor (5) Suspensions (3) Outside rearview mirror (42) Interior rearview mirror (4) Engine mount (9) Drums and shoes (6) Windscreen wipers (19) Thermostat (10) Engine head (3) Transmission (1) Central tunnel (2) Turbine (7) Valve (3) EGR valve (5) Interior blower (18) Side window (6) Steering wheel (7)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos