Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to remove the lock actuator on the Ford Focus MK3

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Lock
Operation: How to remove the lock actuator on the Ford Focus MK3

In this video tutorial we will see how to remove and replace the front door lock actuator on the Ford Focus third series, but also on the C-max. First we open the front door and start by removing the door panel; to do this, remove the window lifter push-button panel, disconnecting the electrical connector, and unscrew all the fixing screws that we find on the sides of the panel. At this point we remove the window, unscrewing the screws located inside the holes; then we disassemble the module and the lock actuator, as shown in the video.


Posted on 4 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - What problem could present, the lock of the Ford Focus? Read Answer
    • Focus 2011-2018 - How much does it cost to replace the ignition lock on the Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos