Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removing the Ford Focus MK1 front door lock module

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Lock
Operation: Removing the Ford Focus MK1 front door lock module

Let's see in this video how to remove the front door lock of a Ford Focus first series, following these simple instructions. First we go to open the front door; then we remove the door panel, going to remove the triangular piece of plastic and all the plastics or covers of the panel and unscrewing all the fixing screws. After removing the panel, remove the internal lining and unscrew the fixing screws of the lock, which we find inside the holes; we just have to unscrew the side screws and lever from the outside to remove the handle together with the lock.


Posted on 27 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2004-2011 - What problem could present, the lock of the Ford Focus? Read Answer
    • Focus 2011-2018 - How much does it cost to replace the ignition lock on the Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos