Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Ford Focus lock cylinder removal

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Lock
Operation: Ford Focus lock cylinder removal

In this video tutorial we will see how to remove the door lock cylinder of a Ford Focus third series. First we open the door and we go to disassemble its internal panel, removing all the fixing screws and finally disconnecting the electric connector of the window lifters and the cable of the handle. At this point we are going to unscrew the torx screw that we find on the side and then extract our lock cylinder, as shown in the video; now remove the cover by pressing on the side tab. We just have to replace it and mount the new one!


Posted on 22 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - What problem could present, the lock of the Ford Focus? Read Answer
    • Focus 2011-2018 - How much does it cost to replace the ignition lock on the Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos