Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Ignition Cylinder on the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011

Today's guide will show you how to remove and replace the ignition cylinder on the Ford Focus, following the instructions below. First, get inside the vehicle and remove the plastic cover located behind the steering wheel; then disconnect the electrical connector of the ignition cylinder by removing the fastening pin, as shown in the video. Next, replace and install the new ignition cylinder, also replacing the key, following the video tutorial to the end!

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Ignition Cylinder on a Ford Focus?
How to Remove the Ignition Cylinder on a Ford Focus?
Ford Focus (1998-2004 / MK 1) In this tutorial, you will see how to remove the ignition cylinder on a Ford Focus, a very simple and quick operation. To do this, you will need a th…
Guide to Removing the Cylinder Head on a Ford Focus
Guide to Removing the Cylinder Head on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today's main instructions will show you how to remove and replace the engine cylinder head on a Ford Focus. First, lift the vehicle and start by remo…
Replacing Spark Plugs on Ford Focus
Replacing Spark Plugs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Replace the damaged spark plugs on a Ford Focus. Open the bonnet and lift it, securing it in place. Remove the soundproofing panel covering the engin…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos