Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch Master Cylinder on the Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

Below, we will see the step-by-step instructions on how to remove and replace the clutch master cylinder on the Ford Focus. First, open the bonnet of the vehicle and remove the engine protection cover; then disconnect the hydraulic line from the clutch master cylinder, subsequently removing the support and the clutch pedal to access the pump, as illustrated in the video.

At this point, remove and replace the clutch master cylinder with the new one, as well as with the original spare part; reassemble everything, applying the reverse procedure!


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Master Cylinder on the Ford Focus
How to Replace the Clutch Master Cylinder on the Ford Focus
Ford Focus (1998-2004 / MK 1) Today's guide will show you the main instructions on how to remove and replace the clutch master cylinder on the Ford Focus. First, open the bonnet a…
How do you replace the clutch of the Ford Focus?
How do you replace the clutch of the Ford Focus?
Ford Focus (2011-2018 / MK 3) In order to replace the clutch on the Ford Focus, you need to lift the car so that the front wheels are not in contact with the ground: they will nee…
Removing the Clutch on Ford Focus
Removing the Clutch on Ford Focus
Ford Focus (1998-2004 / MK 1) In this video, learn how to remove the flywheel and clutch from the Ford Focus 1.8 diesel. First, lift the vehicle: then, once you have disconnected …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos