Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Master Cylinder on the Ford Focus

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004

See other generations:
Video tutorial

Today's guide will show you the main instructions on how to remove and replace the clutch master cylinder on the Ford Focus. First, open the bonnet and start by removing the air filter box, disconnecting the intake hose (loosening the metal clip screw); then, drain the clutch fluid reservoir.

At this point, remove the master cylinder located near the clutch pedal, disconnecting the hydraulic line and unscrewing the mounting bolts; replace the clutch pump and reassemble everything, following the video tutorial to the end!


Updated on 5 September 2026 by ScegliAuto


Related tutorials

Replacing the Clutch Master Cylinder on the Ford Focus
Replacing the Clutch Master Cylinder on the Ford Focus
Ford Focus (2011-2018 / MK 3) Below, we will see the step-by-step instructions on how to remove and replace the clutch master cylinder on the Ford Focus. First, open the bonnet of…
How to Replace the Clutch Pedal on the Ford Focus
How to Replace the Clutch Pedal on the Ford Focus
Ford Focus (2011-2018 / MK 3) Follow the main instructions on how to remove and replace the clutch pedal on the Ford Focus. First, open the bonnet and begin by removing the batter…
How to Replace the Clutch Pump on the Ford Focus?
How to Replace the Clutch Pump on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the clutch pump on the Ford Focus, open the bonnet and access the components at the rear of the engine bay. You can access these parts by …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos