Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the clutch spring in a Ford Focus ST?

Model: Ford Focus MK 4 - Years 2018-2025
Part: Clutch

If you have decided to change the clutch spring, know that it is a simple job and can make a difference in the pedal response. Put the car in safety and look for the spring provided under the clutch pedal. You will need pliers or a screwdriver; carefully remove the old spring, which may be a bit resistant. Now take the new spring, put it in its place and make sure it is secure. Try pressing the pedal several times to feel the difference. If everything is in order, you're done! Now you can enjoy a more responsive clutch. If you don't feel confident in performing these operations on your own, contact a specialized workshop.

Posted on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement or installation of the Ford Focus clutch pedal spring.
Replacement or installation of the Ford Focus clutch pedal spring.
Ford Focus (2004-2011 / MK 2, Focus 2) Today's main steps will show us how to replace or install the clutch pedal spring of the Ford Focus. First, we open the front driver's side door and …
How to Replace the Clutch Pedal on the Ford Focus
How to Replace the Clutch Pedal on the Ford Focus
Ford Focus (2011-2018 / MK 3) Follow the main instructions on how to remove and replace the clutch pedal on the Ford Focus. First, open the bonnet and begin by removing the batter…
Replacing the Clutch Master Cylinder on the Ford Focus
Replacing the Clutch Master Cylinder on the Ford Focus
Ford Focus (2011-2018 / MK 3) Below, we will see the step-by-step instructions on how to remove and replace the clutch master cylinder on the Ford Focus. First, open the bonnet of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos