Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Lock Actuator on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door lock

See other generations:
Video tutorial

In this brief guide, we will see the instructions to remove and replace the lock actuator on a Ford Focus. First, open the front door of the vehicle and start by removing the door panel, taking off the plastic covers and unscrewing the screws underneath; also remove the window switch by disconnecting the electrical connector below.

At this point, remove the lock module by unscrewing the mechanism screws and disconnecting the power wiring; carry out the repair or replacement!


Posted on 23 August 2026 by ScegliAuto


Related tutorials

How to Replace the Door Lock of the Ford Focus?
How to Replace the Door Lock of the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the door lock of the Ford Focus, open the corresponding door to detach the circular cover located on the left side. After the cover is rem…
How to Remove the Lock Actuator on a Ford Focus MK3
How to Remove the Lock Actuator on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In this video tutorial, you will see how to remove and replace the lock actuator of the front door on the third-generation Ford Focus, as well as on …
How to Remove the Lock Cylinder from the Ford Focus
How to Remove the Lock Cylinder from the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this guide, you will find instructions that will allow you to remove and replace the lock cylinder of the Ford Focus. First, open the front door o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos