Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock Cylinder on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door lock

See other generations:
Video tutorial

This video demonstrates how to replace the door lock on a Ford Focus MK2 without too much hassle. First, prepare all the materials you will need for the job (screwdriver, Torx key). Open the door, remove the panel using the screwdriver, and disconnect the electric window cable and the handle cable.

On the side of the door, at handle height, you will notice a plastic cover; remove it using a flathead screwdriver. Insert the Torx screwdriver to unscrew the lock and remove it from its housing.

Now, simply install the new one and reassemble all components.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

Replacing the Clutch Master Cylinder on the Ford Focus
Replacing the Clutch Master Cylinder on the Ford Focus
Ford Focus (2011-2018 / MK 3) Below, we will see the step-by-step instructions on how to remove and replace the clutch master cylinder on the Ford Focus. First, open the bonnet of…
How to Replace the Engine Bay Lock on a Ford Focus Mk2
Ford Focus (2004-2011 / MK 2, Focus 2) This guide shows how to replace the engine bay lock on a Ford Focus Mk2. The first step is to remove the two 10 mm bolts that hold the lock lever in …
How to Remove the Lock Cylinder from the Ford Focus
How to Remove the Lock Cylinder from the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this guide, you will find instructions that will allow you to remove and replace the lock cylinder of the Ford Focus. First, open the front door o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos