Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Focus
  6. : Engine head

Ford Focus - Engine head

Ford Focus (2011-2018 / MK 3)
Guide to disassembling the Ford Focus cylinder head.

The main instructions for today will show us how to disassemble and replace the engine head of the Ford Focus. First, we lift the car and start by …read all…
Posted on 24 November 2023 by ScegliAuto
Ford Focus (2011-2018 / MK 3)
How to remove the cylinder head of a Ford Focus

Let's see together how to remove the cylinder head of a Ford Focus. To begin: we remove the plastic soundproofing panel on the engine head and remove the oil …read all…
Posted on 8 November 2023 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Replacing the valve cover gasket

This video replaces the internal valve cover gasket and brackets on a Ford Focus. Using the tip of a small slotted screwdriver, detach the throttle valves and …read all…
Posted on 21 July 2023 by ScegliAuto

Cigarette Lighter (2) Airbags (5) Alternator (21) Loudspeaker (6) Shock absorbers (6) Antenna (9) Air conditioning (8) Car stereo (61) Anti roll bar (1) Roof Rack Bars (1) Battery (28) Coil (2) Air Vents (5) Bushings (2) Arm (1) Grille (1) Gearbox (2) Spark plugs (15) Glow plugs (3) Bodywork (8) Glove box (1) Control unit (8) Key (43) Locking the trunk (2) Timing belt (30) V-belt (5) Air conditioning (3) Air conditioning controls (4) -board computer (27) Checks and maintenance (146) Oil pan (1) Throttle body (1) Dashboard (15) Gearshift gaiter (1) Bearing (7) Brake discs (8) Rear bench seat (1) Side indicator light (2) Headlight (31) Tail light (11) Fog lights (8) Air filter (23) Cabin air filter (24) Petrol filter (10) Diesel filter (28) Oil filter (8) Hand brake (10) Clutch (7) Grille (6) Injectors (8) Window lift switch (2) Reverse gear switch (1) Accessory Kit (12) Light bulb (22) Side turn signal light bulb (9) Headlight bulb (37) Rear light bulb (26) Interior lights ceiling light bulb (12) Antifreeze liquid (3) Dashboard light (3) License plate light (4) Third brake light (3) Handle (18) Mask (1) Engine (17) Window motor (6) Starter motor (13) Engine oil (15) Power steering oil (2) Door panel (36) Windshield (1) Front bumper (17) Rear bumper (13) Brake pads (20) Hydraulic pistons (3) Tires (7) Gear Shift Knob (14) Pump (11) Fuel pump (30) Door (7) Push button (4) Window lift button (4) Instrument cluster (42) Radiator (9) Passenger compartment heating radiator (7) (1) Wheel (5) Fuse box (75) Seat (24) Drive shaft (2) Crankshaft RPM sensor (3) Coolant temperature sensor (1) Parking sensors (1) Lock (12) Lambda sensor (5) Suspensions (3) Outside rearview mirror (42) Interior rearview mirror (4) Engine mount (9) Drums and shoes (6) Windscreen wipers (19) Thermostat (10) Engine head (3) Transmission (1) Central tunnel (2) Turbine (7) Valve (3) EGR valve (5) Interior blower (18) Side window (6) Steering wheel (7)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos