Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Guide to disassembling the Ford Focus cylinder head.

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Engine head
Operation: Guide to disassembling the Ford Focus cylinder head.

The main instructions for today will show us how to disassemble and replace the engine head of the Ford Focus. First, we lift the car and start by disassembling and removing the right front wheel and the fender; then we disconnect the serpentine belt and remove the crankshaft pulley, as shown in the video. At this point, we disconnect the timing belt and unscrew the bolts of the head cover and then the head, disconnecting the various wiring; it will then be possible to replace the head gasket, following the video tutorial until the end!


Posted on 24 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2004-2011 - What are the torque values for the cylinder head bolts of a Ford Focus 2? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos