Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Brake drums and shoes

Ford Focus - Brake drums and shoes

Brake Drums And Shoes Ford Focus (2011-2018 / mk 3)

Ford Focus (2011-2018 / MK 3)
How to replace the rear brake shoes on the Ford Focus?
To replace the rear brake shoes on the Ford Focus, lift the car using a jack so that the corresponding wheel is not in contact with the ground. After the wheel …Read all…
Posted on 8 September 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Instructions for Removing Rear Drums
Position the vehicle on suitable axle stands and remove the rear wheels: the drum has two threaded holes into which two bolts should be inserted and tightened …Read all…
Posted on 22 February 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Replacing Brake Shoes and Actuator Cylinder on a Drum Brake System
In this video, the brake shoes and the rear wheel cylinder of a Ford Focus are replaced. First, remove the wheel cover using a screwdriver, then remove the …Read all…
Posted on 13 February 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
How to Install or Replace Brake Drums and Shoes
If you have a Ford Focus and want to replace the brake drums and shoes, this tutorial can help you. Secure the vehicle on a ramp and remove the rear wheel. …Read all…
Posted on 16 February 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Replacement of Brake Drum and Shoes
For this operation, you will need the following tools: socket wrench, screwdriver set, brake cleaning fluid, and rags. First step: lift the vehicle and remove …Read all…
Posted on 4 February 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
How to Replace Brake Drum and Shoes
Remove the protective cover from the hub and take off the nut, then dismantle the drum using the appropriate puller. Remove both shoes from the support. If …Read all…
Posted on 4 February 2026 by ScegliAuto

Brake Drums And Shoes Ford Focus (1998-2004 / mk 1)

Ford Focus (2011-2018 / MK 3)
How to replace the rear brake shoes on the Ford Focus?
To replace the rear brake shoes on the Ford Focus, lift the car using a jack so that the corresponding wheel is not in contact with the ground. After the wheel …Read all…
Posted on 8 September 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Instructions for Removing Rear Drums
Position the vehicle on suitable axle stands and remove the rear wheels: the drum has two threaded holes into which two bolts should be inserted and tightened …Read all…
Posted on 22 February 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Replacing Brake Shoes and Actuator Cylinder on a Drum Brake System
In this video, the brake shoes and the rear wheel cylinder of a Ford Focus are replaced. First, remove the wheel cover using a screwdriver, then remove the …Read all…
Posted on 13 February 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
How to Install or Replace Brake Drums and Shoes
If you have a Ford Focus and want to replace the brake drums and shoes, this tutorial can help you. Secure the vehicle on a ramp and remove the rear wheel. …Read all…
Posted on 16 February 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
Replacement of Brake Drum and Shoes
For this operation, you will need the following tools: socket wrench, screwdriver set, brake cleaning fluid, and rags. First step: lift the vehicle and remove …Read all…
Posted on 4 February 2026 by ScegliAuto
Ford Focus (1998-2004 / MK 1)
How to Replace Brake Drum and Shoes
Remove the protective cover from the hub and take off the nut, then dismantle the drum using the appropriate puller. Remove both shoes from the support. If …Read all…
Posted on 4 February 2026 by ScegliAuto
Cigarette lighter (3) Airbag (12) Alternator (25) Speaker (8) Shocks (6) Antenna (10) Air conditioning (10) Car stereo (59) Anti-roll bar (2) Roof rack bars (1) Battery (28) Ignition coil (2) Air vents (5) Bushings (2) Control arm (2) Grille (1) Transmission (11) Spark plugs (17) Glow plugs (3) Body (22) Glove compartment (1) Control unit (7) Key (77) Trunk lock (2) Timing belt (47) V-belt (5) Air conditioner (3) A/C controls (5) Onboard computer (13) Checks and maintenance (95) Oil pan (1) Throttle body (1) Dashboard (15) Shifter boot (2) Bearing (7) Brake rotors (8) Rear bench seat (1) Side marker light (2) Headlight (45) Tail light (22) Fog lights (12) Air filter (30) Cabin air filter (31) Fuel filter (11) Diesel fuel filter (37) Oil filter (8) Parking brake (17) Clutch (11) Grille (7) Fuel injectors (14) Window switch (2) Reverse light switch (1) Accessory kit (12) Light bulb (25) Side marker bulb (10) Headlight bulb (51) Tail light bulb (37) Interior dome light bulb (13) Antifreeze coolant (5) Instrument panel light (3) License plate light (5) (3) Handle (26) Trim cover (1) Engine (17) Power window motor (7) Starter motor (16) Engine oil (13) Power steering fluid (3) Clock (19) Door trim panel (43) Windshield (1) Front bumper (18) Rear bumper (17) Brake pads (20) Hydraulic pistons (2) Shift knob (20) Pump (13) Fuel pump (33) Car door (10) Push button (4) Power window switch (4) Instrument cluster (15) Radiator (13) Heater core (8) (1) Wheel (6) Fuse box (128) Seat (29) Axle shaft (2) Crankshaft position sensor (3) Engine coolant temperature sensor (3) Parking sensors (1) Door lock (12) Oxygen sensor (6) Suspension system (3) Side mirror (48) Rearview mirror (5) Warning light – error code (74) (58) Tire pressure warning light (19) Service warning light (129) Engine mount (9) Brake drums and shoes (6) Fuel cap (5) Windshield wipers (26) Thermostat (10) Cylinder head (3) Drivetrain (1) Center console tunnel (3) Turbocharger (8) Windshield washer nozzle (1) Valve (3) EGR valve (10) Blower motor (19) Side window (8) Steering wheel (9)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos