Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Drum and Shoes

Model: Ford Focus MK 1 - Years 1998-2004
Part: Brake drums and shoes

Remove the protective cover from the hub and take off the nut, then dismantle the drum using the appropriate puller. Remove both shoes from the support. If they are stuck, tap them lightly with a hammer. Unscrew the brake screws and remove all parts. Clean all brake components thoroughly from rust, mud, and deposits. Prepare the new linings, lubricate the drum well, and install it. Install the return springs. Install the brake cable. Refit the remaining springs in their positions. Ensure the components move freely. Refit the drum after cleaning it thoroughly with a deoxidising spray and check its proper functioning by pulling the handbrake cable.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install or Replace Brake Drums and Shoes
How to Install or Replace Brake Drums and Shoes
Ford Focus (1998-2004 / MK 1) If you have a Ford Focus and want to replace the brake drums and shoes, this tutorial can help you. Secure the vehicle on a ramp and remove the rear …
How to replace the rear brake shoes on the Ford Focus?
How to replace the rear brake shoes on the Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the rear brake shoes on the Ford Focus, lift the car using a jack so that the corresponding wheel is not in contact with the ground. After…
Instructions for Removing Rear Drums
Instructions for Removing Rear Drums
Ford Focus (1998-2004 / MK 1) Position the vehicle on suitable axle stands and remove the rear wheels: the drum has two threaded holes into which two bolts should be inserted and …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos