Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Side marker light

Ford Focus - Side marker light

Side Marker Light Ford Focus (2011-2018 / mk 3)

Ford Focus (2011-2018 / MK 3)
Replacing the Side Indicator Bulb on a Ford Focus
Start by removing the cover of the mirror cap: to do this, use a flat screwdriver or a plastic wedge and pry behind the glass to release the clips of the cap. …Read all…
Posted on 10 June 2026 by ScegliAuto
Ford Focus (2004-2011 / MK 2, Focus2)
Removing the Side Indicator on the Ford Focus (Integrated into the Wing Mirror)
Before proceeding with the replacement of the side indicator bulb (integrated into the external wing mirror), ensure the vehicle is safely positioned on a flat …Read all…
Posted on 15 April 2026 by ScegliAuto

Side Marker Light Ford Focus (2004-2011 / mk 2, focus 2)

Ford Focus (2011-2018 / MK 3)
Replacing the Side Indicator Bulb on a Ford Focus
Start by removing the cover of the mirror cap: to do this, use a flat screwdriver or a plastic wedge and pry behind the glass to release the clips of the cap. …Read all…
Posted on 10 June 2026 by ScegliAuto
Ford Focus (2004-2011 / MK 2, Focus2)
Removing the Side Indicator on the Ford Focus (Integrated into the Wing Mirror)
Before proceeding with the replacement of the side indicator bulb (integrated into the external wing mirror), ensure the vehicle is safely positioned on a flat …Read all…
Posted on 15 April 2026 by ScegliAuto
Cigarette lighter (3) Airbag (12) Alternator (25) Speaker (8) Shocks (6) Antenna (10) Air conditioning (10) Car stereo (59) Anti-roll bar (2) Roof rack bars (1) Battery (28) Ignition coil (2) Air vents (5) Bushings (2) Control arm (2) Grille (1) Transmission (11) Spark plugs (17) Glow plugs (3) Body (22) Glove compartment (1) Control unit (7) Key (77) Trunk lock (2) Timing belt (47) V-belt (5) Air conditioner (3) A/C controls (5) Onboard computer (13) Checks and maintenance (95) Oil pan (1) Throttle body (1) Dashboard (15) Shifter boot (2) Bearing (7) Brake rotors (8) Rear bench seat (1) Side marker light (2) Headlight (45) Tail light (22) Fog lights (12) Air filter (30) Cabin air filter (31) Fuel filter (11) Diesel fuel filter (37) Oil filter (8) Parking brake (17) Clutch (11) Grille (7) Fuel injectors (14) Window switch (2) Reverse light switch (1) Accessory kit (12) Light bulb (25) Side marker bulb (10) Headlight bulb (51) Tail light bulb (37) Interior dome light bulb (13) Antifreeze coolant (5) Instrument panel light (3) License plate light (5) (3) Handle (26) Trim cover (1) Engine (17) Power window motor (7) Starter motor (16) Engine oil (13) Power steering fluid (3) Clock (19) Door trim panel (43) Windshield (1) Front bumper (18) Rear bumper (17) Brake pads (20) Hydraulic pistons (2) Shift knob (20) Pump (13) Fuel pump (33) Car door (11) Push button (4) Power window switch (4) Instrument cluster (15) Radiator (13) Heater core (8) (1) Wheel (6) Fuse box (128) Seat (29) Axle shaft (2) Crankshaft position sensor (3) Engine coolant temperature sensor (3) Parking sensors (1) Door lock (12) Oxygen sensor (6) Suspension system (3) Side mirror (49) Rearview mirror (5) Warning light – error code (74) (58) Tire pressure warning light (19) Service warning light (130) Engine mount (9) Brake drums and shoes (6) Fuel cap (5) Windshield wipers (26) Thermostat (10) Cylinder head (3) Drivetrain (1) Center console tunnel (3) Turbocharger (8) Windshield washer nozzle (1) Valve (3) EGR valve (10) Blower motor (19) Side window (8) Steering wheel (9)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos