Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Side Indicator Bulb on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Side marker light

Start by removing the cover of the mirror cap: to do this, use a flat screwdriver or a plastic wedge and pry behind the glass to release the clips of the cap. Next, remove the glass by applying pressure with the screwdriver on the clips that secure the mirror. Repeat the same operation (this time you can use your hand instead of the screwdriver) to detach the side indicator light. Disconnect the connector to fully remove it and replace the bulb. Reverse the steps for reassembly. Cheers!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the turn signal bulb in the Ford Focus side mirror
Replacement of the turn signal bulb in the Ford Focus side mirror
Ford Focus (2011-2018 / MK 3) Today we will see step-by-step instructions on how to disassemble and replace the side turn signal bulb of the external rearview mirror of the Ford F…
How to replace the turn signal bulb of the Ford Focus rearview mirror
How to replace the turn signal bulb of the Ford Focus rearview mirror
Ford Focus (2004-2011 / MK 2, Focus 2) Today's step-by-step instructions will show us how to disassemble and replace the turn signal bulb of the external rearview mirror of the Ford Focus.…
How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
How to Replace the Indicator Bulb in a Ford Focus Wing Mirror
Ford Focus (2004-2011 / MK 2, Focus 2) How to replace the side indicator located in the external mirror of a Ford Focus? Proceed as follows: using a lever with a plastic or rubber coating,…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos