Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the mirror arrow bulb on Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Side turn signal light bulb
Operation: How to replace the mirror arrow bulb on Ford Focus

How to replace the side indicator on the exterior mirror of a Ford focus? Let's see how to proceed: with a lever with a plastic or rubber coating, let's pry between the perimeter of the mirror frame and the mirror glass of the same. We pry until the slide comes off the mirror; very delicate operation because the slide or the mirror itself could break. Once the mirror has been removed, disconnect the power supply terminal of the bulb (arrow) to be replaced. We replace the damaged bulb with a new one (same voltage and size) inside the mirror arrow.


Posted on 8 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How to replace the mirror arrow bulb on a Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos