Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Auxiliary Belt on a Ford Focus MK1

Model: Ford Focus MK 1 - Years 1998-2004
Part: V-belt

Let's see how to change the auxiliary belt on a Ford Focus MK1; first, lift the vehicle and support it on at least two axle stands to ensure it won't fall: this allows access to the V-belt, which you will remove by loosening the tensioner (which should be replaced anyway). You can find the kit on eBay with code 403919433395 for just £18.00, including delivery. Install the new tensioner and belt, following the video; thread the belt through the components as shown in the diagram. Start the engine to check everything is working correctly. If all is well, lower the vehicle. Job done.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (1998-2004 / MK 1) In this video, you will learn how to replace the auxiliary belt on the first series Ford Focus (this tutorial also applies to the second series Focus…
Ford Focus (2004-2011 / MK 2, Focus 2) Today, we will see how to replace the auxiliary belt on the Ford Focus. Open the front bonnet by pulling the internal lever, then lift the vehicle on…
Ford Focus (2004-2011 / MK 2, Focus 2) The main institutions mentioned in this guide will explain the procedure for disassembling and replacing the hydraulic power steering pump of the For…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos