Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on the Ford Focus 1.6 TDCi

Model: Ford Focus MK 3 - Years 2011-2018
Part: Timing belt

You will see step-by-step instructions on how to remove and replace the timing belt on the Ford Focus 1.6 TDCi. First, open the bonnet and begin by removing the timing cover, moving the wiring aside; then lift the vehicle and disconnect the auxiliary belt, removing the front right wheel and the wheel arch liner. At this point, undo the central bolt of the crankshaft pulley to remove it; dismantle the engine mount and take the necessary references for the timing belt replacement, following the video tutorial to the end!

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides the main instructions on how to dismantle and replace the timing belt on a Ford Focus 1.6 TDCi. First, raise the vehicle and begi…
Replacement of the timing belt for the Ford Focus 2.0 TDCi.
Replacement of the timing belt for the Ford Focus 2.0 TDCi.
Ford Focus (2011-2018 / MK 3) Today's main instructions will show us the procedure for disassembling and replacing the timing belt on the Ford Focus 2.0 TDCi. First, let's open th…
How to Replace the Timing Belt on the Ford Focus 2.0 TDCi
How to Replace the Timing Belt on the Ford Focus 2.0 TDCi
Ford Focus (2011-2018 / MK 3) Today, let's briefly go through the main instructions for removing and replacing the timing belt on the Ford Focus 2.0 TDCi. First, open the bonnet o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos