Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Mount on Ford Focus 1.6 TDCi

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Engine mount

In this tutorial, you will learn how to remove and replace the engine mount on a second-generation Ford Focus. First, open the bonnet and remove the plastic cover of the battery; then disconnect the two terminals (positive and negative) and remove the battery bracket by unscrewing the bolt. Once the battery and battery holder are removed, access the side engine mount; then remove the metal bracket by unscrewing the fixing screws, and remove the central bolt of the engine mount, replacing it with the new one, as shown in the video!

Updated on 23 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Right Engine Mount on a Ford Focus?
How to Replace the Right Engine Mount on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, see how to replace the right engine mount on a Ford Focus, a simple task valid for the 1.6 TDCi version. First, wait for the engine…
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides the main instructions on how to dismantle and replace the timing belt on a Ford Focus 1.6 TDCi. First, raise the vehicle and begi…
Replacing the Timing Belt on the Ford Focus 1.6 TDCi
Replacing the Timing Belt on the Ford Focus 1.6 TDCi
Ford Focus (2011-2018 / MK 3) You will see step-by-step instructions on how to remove and replace the timing belt on the Ford Focus 1.6 TDCi. First, open the bonnet and begin by r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos