Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Mount Replacement for Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Engine mount

In this video, you will see how to remove and replace the engine mount on a Ford Focus third generation by following these simple steps. First, slightly lift the engine using a jack and position it as shown in the video; then, remove the washer reservoir by unscrewing the fixing screws, and unscrew the additional fixing screws of the left engine mount using a socket spanner. Now, remove the old engine mount and replace it with the new one; finally, refit everything, ensuring that the other mounts are in good condition!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Right Engine Mount on a Ford Focus?
How to Replace the Right Engine Mount on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, see how to replace the right engine mount on a Ford Focus, a simple task valid for the 1.6 TDCi version. First, wait for the engine…
Replacing the Timing Belt on the Ford Focus 1.6 TDCi
Replacing the Timing Belt on the Ford Focus 1.6 TDCi
Ford Focus (2011-2018 / MK 3) You will see step-by-step instructions on how to remove and replace the timing belt on the Ford Focus 1.6 TDCi. First, open the bonnet and begin by r…
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Replacing the Timing Belt on a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) This guide provides the main instructions on how to dismantle and replace the timing belt on a Ford Focus 1.6 TDCi. First, raise the vehicle and begi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos