Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Timing Belt from a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Timing belt

Remove the timing belt from a Ford Focus. Lift the car on a column lift; remove the front wheel and the right wheel arch liner. Once these operations are complete, lift the bonnet, remove the engine soundproofing panel and the timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. Using a socket wrench, unscrew the tensioner pulley bolt and remove the water pump. Fit the new water pump (previously removed), the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, refit the rivets along with the wheel arch liner and reattach the car wheel.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing chain of a Ford Focus?
How to replace the timing chain of a Ford Focus?
Ford Focus (2018-2025 / MK 4) Good morning, today we are here to replace the timing belt of our Ford Focus. We will start by opening the hood of the engine. Then, we will need to …
How to Replace the Timing Belt on a Ford Focus?
How to Replace the Timing Belt on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the timing belt on a Ford Focus, open the bonnet to access the components inside the engine bay. Next, remove the air filter box, which wi…
How to Replace the Timing Belt of the Ford Focus?
How to Replace the Timing Belt of the Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the timing belt on the Ford Focus, open the bonnet to detach the plastic cover on the left side of the engine block: underneath this cover…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos