Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Extract the Spare Tire from a Ford Endeavour

Model: Ford Endeavour MK 2 - Years 2016-2023
Part: Wheel

In today's video tutorial, you will see the necessary guide to extract the spare tire from its compartment, in order to replace the tire in case of a flat on the Ford Endeavour. First, open the rear hatch of the trunk and start removing the upper panel to access the spare tire screw; use the socket wrench used to unscrew the wheel bolts to unscrew the screw, allowing the spare tire to lower, as shown in the video. At this point, replace the flat tire with the spare tire, lifting the vehicle with the jack!

Updated on 21 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Suspension on a Ford Endeavour?
How to Replace the Suspension on a Ford Endeavour?
Ford Endeavour (2016-2023 / MK 2) To replace the suspension on a Ford Endeavour, lift the vehicle with a jack or lift so that the wheels are off the ground. Next, loosen the bolts sec…
Replace Front Brake Pads on the Ford Endeavour 3.2L
Replace Front Brake Pads on the Ford Endeavour 3.2L
Ford Endeavour (2016-2023 / MK 2) Today, you will learn how to remove and replace the front brake pads on the Ford Endeavour 3.2L in simple and quick steps. First, loosen the wheel bo…
How to Replace the Timing Belt on the Ford Endeavour
How to Replace the Timing Belt on the Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) To replace the timing belt on the Ford Endeavour, open the hood to access the components located inside the engine compartment. At the front of the e…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos