Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Doors on the Ford F-350

Model: Ford F-350 Phn131 - Years 1999-2007
Part: Door trim panel

In today's video, we will see how to extract the doors from their hinges on the Ford F-350. Park the vehicle on a level surface and open the door. Remove the window switch trim and then the reflector. Next, unscrew the screws and proceed to remove the door panel. Once this is done, you can remove the insulation layer. Now, disconnect the power connectors inside the door panel and then pull out the wires. After that, you need to detach the hinges using a hammer. You can then extract the doors from their hinges.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Ford F-350
How to Reset the Oil Light on a Ford F-350
Ford F-350 (2017-2023 / P558) Here is a quick and effective method to reset the oil light on your Ford F-350 independently. First, ensure that all the doors of the vehicle are sec…
How to Replace the Front Shock Absorber on a Ford F-350
How to Replace the Front Shock Absorber on a Ford F-350
Ford F-350 (2008-2010 / P356) To replace the front shock absorber on a Ford F-350, lift the vehicle with a jack so that the corresponding wheel is off the ground. Next, loosen all…
How to Remove the Front Bumper on a Ford F-350
How to Remove the Front Bumper on a Ford F-350
Ford F-350 (1999-2007 / Phn131) To remove the front bumper on a Ford F-350, access the inside of the bumper where the screws that secure it to the housing are located. Once the scre…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos