Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulb on the Ford F-350

Model: Ford F-350 P473 - Years 2011-2016
Part: Fog lights

Discover how to remove and replace the front fog light bulbs on the Ford F-350 by following the instructions below. First, remove the plastic cover of the fog light bulb located in the wheel well; then disconnect the electrical connector of the bulb by unscrewing the screws of the fog light to remove the bulb along with the socket, as shown in the video. At this point, replace the bulb with a new one of the correct type and with the same fitting; then reassemble everything!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Ford F-350 (2008)
How to Replace the Headlight Bulb on a Ford F-350 (2008)
Ford F-350 (2008-2010 / P356) In this tutorial, you will learn how to remove and replace the headlight bulb on a Ford F-350 by following these simple steps. First, open the hood o…
How to Replace the Headlight Bulb on a Ford F-350
How to Replace the Headlight Bulb on a Ford F-350
Ford F-350 (2011-2016 / P473) To replace the headlight bulb on a Ford F-350, open the hood to access the screws located on the top and inside of the headlight. Once the screws are…
How to Replace the Rear Turn Signal Bulb on a Ford F-350
How to Replace the Rear Turn Signal Bulb on a Ford F-350
Ford F-350 (2011-2016 / P473) In this video tutorial, you will learn how to disassemble and replace the rear turn signal bulb on a Ford F-350 in simple and quick steps. First, ope…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos