Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate bulb on the Ford F-350?

Model: Ford F-350 P558 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: License plate light

See other generations:
Video tutorial

To replace the license plate bulb on the Ford F-350, access the inside of the bumper: this area can be reached by getting under the vehicle. The connector present here must be disconnected, and the bulb can be pulled out of its housing.

Once the old bulb is removed, connect the new one to the connector and insert it back into its place. After the bulb is inserted, check its operation and perform the same procedure for the other bulb.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front License Plate Holder on a Ford F-350
How to Remove the Front License Plate Holder on a Ford F-350
Ford F-350 (2011-2016 / P473) In today's video, we will see how to easily install and remove the front license plate holder on a Ford F-350. This operation is useful if you are mo…
How to Replace the Front Fog Light Bulb on the Ford F-350
How to Replace the Front Fog Light Bulb on the Ford F-350
Ford F-350 (2011-2016 / P473) Discover how to remove and replace the front fog light bulbs on the Ford F-350 by following the instructions below. First, remove the plastic cover o…
How to Replace the Rear Turn Signal Bulb on a Ford F-350
How to Replace the Rear Turn Signal Bulb on a Ford F-350
Ford F-350 (2011-2016 / P473) In this video tutorial, you will learn how to disassemble and replace the rear turn signal bulb on a Ford F-350 in simple and quick steps. First, ope…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos