Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front License Plate Holder on a Ford F-350

Model: Ford F-350 P473 - Years: 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

In today's video, we will see how to easily install and remove the front license plate holder on a Ford F-350. This operation is useful if you are moving to a state that requires a front license plate. First, locate the two holes at the bottom of the bumper and fit the license plate holder.

Ensure it is secured properly at the top, and the job will be complete. To detach it, crouch under the front bumper and locate the corresponding area where the two clips of the license plate holder are located.

You can then unclip it from its position.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to replace the license plate bulb on the Ford F-350?
How to replace the license plate bulb on the Ford F-350?
Ford F-350 (2017-2023 / P558) To replace the license plate bulb on the Ford F-350, access the inside of the bumper: this area can be reached by getting under the vehicle. The conn…
How to Replace the Front Wheel Bearing on a Ford F-350?
How to Replace the Front Wheel Bearing on a Ford F-350?
Ford F-350 (1999-2007 / Phn131) To replace the front wheel bearing on a Ford F-350, first lift the vehicle so that the front wheel is off the ground. You will need to remove the bol…
How to Remove the Front Bumper on a Ford F-350
How to Remove the Front Bumper on a Ford F-350
Ford F-350 (1999-2007 / Phn131) To remove the front bumper on a Ford F-350, access the inside of the bumper where the screws that secure it to the housing are located. Once the scre…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos