Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Hub Retaining Bolt

Model: Ford Transit MK 7 - Years 2006-2014
Part: Brake rotors

Lift the vehicle on a ramp or suitable axle stands and remove the front wheel; then remove the retaining bolts of the hub to which the wheel studs and the brake caliper support are attached. Detach the hub with the studs and unscrew the broken part of the bolt remaining in the threaded hole of the disc using pliers; at this point, reposition the brake caliper, the hub, and tighten the retaining bolts using a new set of bolts: if one has already broken, it is better not to risk damaging others.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Front Hub Bearing Replacement
Front Hub Bearing Replacement
Ford Transit (2006-2014 / MK 7) To replace the front wheel bearing, lift the vehicle on the ramp and remove the wheel on which you will perform the repair; then remove the brake cal…
How to Replace the Brake Shoes on a Ford Transit
How to Replace the Brake Shoes on a Ford Transit
Ford Transit (2006-2014 / MK 7) After removing the pins and taking off the wheel, start by unscrewing the hub bolts (where the shoes are located) to detach it from its support. Pull…
Replacement front brake discs on Ford Transit MK7 (2011)
Replacement front brake discs on Ford Transit MK7 (2011)
Ford Transit (2006-2014 / MK 7) In today's video we will see how to remove and replace the front brake discs on a 2011 Ford Transit MK7. First we lift the car on the front side and …

How to Replace the Engine Air Filter on BMW 3 Series

How to replace the engine air filter on BMW 3 Series? Let's see how to proceed in this video: open the car door, pull up the engine hood release lever located at the bottom left of the dashboard, and lift the front hood, securing it. Using a screwdriver, remove the air box assembly (where the air filter is located), disconnect the engine air intake hose and the metal clamp pin. Remove the air filter box from the vehicle body, then extract the worn air filter and insert a new one, ensuring it fits snugly around the walls of the box. Finally, reassemble the air box panel and tighten the screws. Close the front hood when finished.

Watch the video!


by ScegliAuto

More videos