Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Shoes on a Ford Transit

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Brake drums and shoes

See other generations:
Video tutorial

After removing the pins and taking off the wheel, start by unscrewing the hub bolts (where the shoes are located) to detach it from its support. Pull the cover towards you with your hands to remove it from the wheel hub. Prepare to disassemble the handbrake shoes on the wheel hub, cleaning all dirt and debris from the disassembled parts with brushes.

Before reassembly, lubricate the parts as shown in the video, install the handbrake shoes and all associated pins. Now place the wheel onto the hub and tighten all the bolts, lower the vehicle to the ground, and always check the brake pedal pressure.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Ford Transit Connect
How to Replace the Front Brake Pads on a Ford Transit Connect
Ford Transit (2000-2006 / MK 6) In this brief and simple guide, follow the instructions to remove and replace the front brake pads on a Ford Transit Connect. First, lift the vehicle…
How to Change the Rear Brake Pads on a Ford Transit Custom
How to Change the Rear Brake Pads on a Ford Transit Custom
Ford Transit (2014-2024 / MK 8) In this brief guide, discover how to remove and replace the rear brake pads on a Ford Transit Custom in simple and quick steps. First, lift the vehic…
Replacing the Rear Brake Discs of the Ford Transit
Replacing the Rear Brake Discs of the Ford Transit
Ford Transit (2006-2014 / MK 7) In this guide, follow the instructions to remove and replace the rear brake discs of the Ford Transit. First, lift the vehicle and remove the rear wh…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos