Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Discs of the Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Brake rotors

In this guide, follow the instructions to remove and replace the rear brake discs of the Ford Transit. First, lift the vehicle and remove the rear wheel; then, unscrew the bolts of the brake caliper to detach it from the disc, as shown in the video. Next, unscrew the nut of the bearing to subsequently remove the rear brake disc; clean the braking system and also replace the brake pads, applying the reverse procedure of disassembly!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear brake discs on a Ford Transit?
How do you replace the rear brake discs on a Ford Transit?
Ford Transit (2014-2024 / MK 8) To replace the rear brake discs on the Ford Transit, you will need to lift the vehicle with a jack or a lift so that the wheels can be removed from t…
Replacement of the rear brake discs of the Ford Transit Custom
Replacement of the rear brake discs of the Ford Transit Custom
Ford Transit (2014-2024 / MK 8) In this short and simple guide, we will see how to disassemble and replace the rear brake discs of the Ford Transit Custom. First, lift the vehicle a…
Replacement of the rear brake pads and discs of the Ford Transit Custom
Replacement of the rear brake pads and discs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today we will see the instructions that will allow us to disassemble and replace the brake pads and discs of the rear brakes of the Ford Transit Cust…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos