Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear brake discs of the Ford Transit Custom

Model: Ford Transit MK 8 - Years 2014-2024
Part: Brake rotors

In this short and simple guide, we will see how to disassemble and replace the rear brake discs of the Ford Transit Custom. First, lift the vehicle and start by removing the rear wheel; then unscrew the fixing screws of the rear brake caliper, in order to remove it from the support, as shown in the video. At this point, also remove the old brake pads, cleaning the caliper from any residual dirt; then install the new original brake pads, pressing on the caliper piston to correctly reassemble it along with the brake caliper!

Posted on 16 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear brake pads and discs of the Ford Transit Custom
Replacement of the rear brake pads and discs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today we will see the instructions that will allow us to disassemble and replace the brake pads and discs of the rear brakes of the Ford Transit Cust…
How do you replace the rear brake discs on a Ford Transit?
How do you replace the rear brake discs on a Ford Transit?
Ford Transit (2014-2024 / MK 8) To replace the rear brake discs on the Ford Transit, you will need to lift the vehicle with a jack or a lift so that the wheels can be removed from t…
How do you reset the brake wear indicator light on the Ford Transit Custom?
How do you reset the brake wear indicator light on the Ford Transit Custom?
Ford Transit (2012-2024 / Custom) In order to reset the brake wear indicator light on the Ford Transit Custom, you first need to replace the excessively worn brake pads by inserting t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos