Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Ford Transit Connect

Model: Ford Transit MK 6 - Years 2000-2006
Part: Brake pads

In this brief and simple guide, follow the instructions to remove and replace the front brake pads on a Ford Transit Connect. First, lift the vehicle and remove the front wheel; then unscrew the fastening bolts of the front brake caliper to remove it from the disc, as shown in the video. At this point, press the caliper piston to retract it, removing the metal clip; remove and replace the brake pads, cleaning the caliper of dirt first, following the video tutorial to the end!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake discs on a Ford Transit Connect van?
How to replace the front brake discs on a Ford Transit Connect van?
Ford Transit (2014-2024 / MK 8) In this tutorial, we can see how to replace the front brake discs on the Ford Transit Connect van, a very simple operation but one that requires good…
How to replace the front brake discs of the Ford Transit.
How to replace the front brake discs of the Ford Transit.
Ford Transit (2014-2024 / MK 8) In this guide, we will go through the instructions that will allow us to disassemble and replace the front brake discs of the Ford Transit. First, we…
How to replace the front headlights in a Ford Transit Connect van?
How to replace the front headlights in a Ford Transit Connect van?
Ford Transit (2006-2014 / MK 7) In this tutorial we can see how to replace the front headlights in the Ford Transit Connect van, an extremely simple and quick operation. First of al…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos