Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Brake Pads on a Ford Transit Custom

Model: Ford Transit MK 8 - Years 2014-2024
Part: Brake pads

In this brief guide, discover how to remove and replace the rear brake pads on a Ford Transit Custom in simple and quick steps. First, lift the vehicle at the rear and remove the wheel; then unscrew the fixing bolts of the rear brake caliper, pressing on the caliper piston to detach it from the disc, as shown in the video. At this point, remove and replace the old brake pads with the new ones, cleaning the caliper of dirt first, and follow the video tutorial to the end for reassembly!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear brake pads and discs of the Ford Transit Custom
Replacement of the rear brake pads and discs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today we will see the instructions that will allow us to disassemble and replace the brake pads and discs of the rear brakes of the Ford Transit Cust…
Replacement of the rear brake discs of the Ford Transit Custom
Replacement of the rear brake discs of the Ford Transit Custom
Ford Transit (2014-2024 / MK 8) In this short and simple guide, we will see how to disassemble and replace the rear brake discs of the Ford Transit Custom. First, lift the vehicle a…
How do you reset the brake wear indicator light on the Ford Transit Custom?
How do you reset the brake wear indicator light on the Ford Transit Custom?
Ford Transit (2012-2024 / Custom) In order to reset the brake wear indicator light on the Ford Transit Custom, you first need to replace the excessively worn brake pads by inserting t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos