Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Discs on Ford Transit MK7 (2011)

Model: Ford Transit MK 7 - Years 2006-2014
Part: Brake rotors

In today's video, you will see how to remove and replace the front brake discs on a 2011 Ford Transit MK7. First, lift the vehicle at the front and remove the wheel; then, unscrew the bolts securing the brake caliper using two spanners. At this point, once the caliper is removed from the disc, unscrew the Torx screws from the wheel hub and use a socket to unscrew the central bolt; separate the hub from the disc to replace it with the new one, as illustrated in the video. Finally, reassemble everything!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake discs of the Ford Transit?
How do you replace the front brake discs of the Ford Transit?
Ford Transit (2000-2006 / MK 6) The brake discs of vehicles, including the Ford Transit, are part of the category of materials that wear out over time and it is important to periodi…
How to replace the front brake discs of the Ford Transit.
How to replace the front brake discs of the Ford Transit.
Ford Transit (2014-2024 / MK 8) In this guide, we will go through the instructions that will allow us to disassemble and replace the front brake discs of the Ford Transit. First, we…
Replacing the Rear Brake Discs of the Ford Transit
Replacing the Rear Brake Discs of the Ford Transit
Ford Transit (2006-2014 / MK 7) In this guide, follow the instructions to remove and replace the rear brake discs of the Ford Transit. First, lift the vehicle and remove the rear wh…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos