Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Ford Focus MK3 tire pressure warning light

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tire pressure warning light

In today's video we will see how to reset the Ford Focus third series tire pressure warning light; before carrying out this operation, all four tires must be at operating pressure. First we get in the car and turn on the ignition; we wait for about three seconds and then turn everything off, making sure that all the doors are closed. At this point we carry out the same operation two more times, subsequently pressing and releasing the brake pedal; we carry out the operation until the spy is reset, as shown in the video!

Posted on 19 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Ford Focus mk3 tire pressure warning light
How to reset the Ford Focus mk3 tire pressure warning light
Ford Focus (2011-2018 / MK 3) The guide shows how to reset the Ford Focus mk3 tire pressure check warning light. No tools or specialist knowledge are required for this operation. …
How to reset the tire pressure warning light on Ford Focus MK3
How to reset the tire pressure warning light on Ford Focus MK3
Ford Focus (2011-2018 / MK 3) Let's find out in this guide how to reset the tire pressure warning light on the Ford Focus third series; all four tires must be brought to working p…
How to reset the tire pressure sensor on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will discover the procedure that will allow us to reset the tire pressure warning light of the Ford Focus; before performing the reset, it i…

How to Remove the Front Brake Rotor on a BMW X3

Let's see how to remove the front brake rotor on a BMW X3. Position your car on a column lift and raise it to a comfortable height for working. Loosen the bolts with a socket wrench or air drill and remove the wheel, then start loosening the bolts of the brake caliper to detach it from the bracket, using a screwdriver to remove the brake pads. Now remove the caliper bracket and loosen the bolts on the brake rotor (using a Torx screwdriver), pull the rotor towards you to slide it off the wheel hub. Install the new brake rotor with all the associated bolts, tighten the caliper bracket to the rotor and the brake pads, then install the brake caliper, making sure to tighten all the bolts securely. Before mounting the wheel, bleed the brake caliper and then tighten the bolt. Finally, install the wheel with the bolts.

Watch the video!


by ScegliAuto

More videos