Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the tire pressure on a Ford vehicle

Model: Ford Ford Various
Part: Tires

Video tutorial

In this video we see how to adjust the tire pressure on a Ford car; first of all, we check that the handbrake is pulled and that the car is turned off. On the thickness of the door there is a sticker where we find a table showing the correct tire pressure for our car, indicated in PSI (the Anglo-Saxon measure) and in BAR (the measure used in the EU). We unscrew the dust cap, which we will put in a safe place, and connect a pedal pump, or an air pump, to the valve to inflate the tire.

When we reach the required pressure, we screw back on the protective cap, and if we have a spare wheel, we also remember to check that.

If the car has a TPMS check, then it will be necessary to reset it by driving a few kilometers.


Posted on 28 September 2025 by ScegliAuto


Related tutorials

How to reset the service light on Ford vehicles
How to reset the service light on Ford vehicles
Ford Ford Various Resetting the tire pressure warning light on a Ford vehicle is a fairly simple and quick operation that can be done independently. To perform this op…
How to Correctly Increase Tyre Pressure and Reset the Tyre Warning Light on the Ford F-150
How to Correctly Increase Tyre Pressure and Reset the Tyre Warning Light on the Ford F-150
Ford Ford Various Resetting the tyre warning light on the Ford F-150 after changing tyres or increasing the pressure of the old ones is straightforward. Follow this vi…
How do you reset the tire pressure warning light on the Ford B-Max?
How do you reset the tire pressure warning light on the Ford B-Max?
Ford Ford Various In order to reset the tire pressure warning light on the Ford B-Max, you need to inflate the tires until they reach the recommended pressure level: t…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos