Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a 2019 Ford Focus

Model: Ford Focus MK 4 - Years 2018-2025
Part:

Let's see how to reset the tyre light on a 2019 Ford Focus: first, ensure the tyres are at the correct pressure; only then can the system be reset, otherwise, that annoying light will remain on the dashboard. On Focus models with key ignition, with the ignition off, press and release the brake pedal once, then within the next 10 seconds, perform this sequence: turn the ignition on/off/on/off/on. Stop with the ignition on, then press and release the brake pedal. Turn off the ignition. Repeat the steps from the ignition on/off sequence to pressing the pedal three times. You will hear a horn beep. The vehicle is now in learning mode. With a TPMS tool, approach the front left valve and wait for the confirmation beep, then proceed with the front right/rear right/rear left. For vehicles with push-button start, with the vehicle off, press and release the brake pedal. Press the "start" button five times, then press and release the brake pedal. Press the "start" button six more times. You will hear a horn beep: this confirms entry into learning mode, then proceed as for the key ignition vehicle.

Posted on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Ford Focus
How to Reset the TPMS Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) To reset the TPMS light on a Ford Focus, first bring all tyres to the correct pressure indicated on the label on the door pillar or in the manual. In…
How to Reset the Tyre Pressure Light on a Ford Focus
How to Reset the Tyre Pressure Light on a Ford Focus
Ford Focus (2011-2018 / MK 3) In this short video tutorial, you can see how to reset the tyre pressure light, or TPMS light, on a third-generation Ford Focus, produced from 2011 t…
How to reset the TPMS light on the Ford Focus
How to reset the TPMS light on the Ford Focus
Ford Focus (2011-2018 / MK 3) When the TPMS light related to tire pressure comes on in the Ford Focus, it means that we need to adjust the tire pressure and then reset the light. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos