Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the EGR valve on the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Valve
Operation: How to replace the EGR valve on the Ford Focus?

In order to replace the Ford Focus EGR valve, you need to open the hood to access the engine compartment and remove the plastic cover from its top. Once this has been removed, it will be possible to access the internal components and disconnect the connector connected to the EGR valve. This must be disconnected from the pipes that are connected to it by removing the relative fixing rings. At this point, it will also be possible to unscrew the fixing bolts of the valve and extract it from its housing, replacing it with a new spare part. The new valve will then need to be connected to the connector and inserted between the pipes.


Posted on 5 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - What problems does the EGR valve of the Ford Focus 1.6 TDCi have? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos