Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the EGR valve of the Ford Focus 1.6 TDCi

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: EGR valve

See other generations:
Video tutorial

Below we will see the main instructions on how to dismantle and replace the EGR valve of the Ford Focus 1.6 TDCi. First, we open the hood of the car and start removing the upper plastic cover; then we remove the windshield wiper arms and the lower partition, as shown in the video.

At this point, we will have access to the EGR valve, where we will disconnect its electrical connector and unscrew its fixing screws to remove it; clean and inspect the components or replace it if damaged, then reassemble everything!


Posted on 28 September 2025 by ScegliAuto


Related tutorials

Removing the EGR Valve on the Ford Focus MK3 1.6 TDCI
Removing the EGR Valve on the Ford Focus MK3 1.6 TDCI
Ford Focus (2011-2018 / MK 3) In this guide, discover the steps to remove, clean, or replace the EGR valve on the third generation Ford Focus with a 1.6 TDCI engine. First, open t…
Where is the EGR valve located on the Ford Focus 1.6 TDCI?
Where is the EGR valve located on the Ford Focus 1.6 TDCI?
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will see where the EGR valve is located on the Ford Focus 1.6 TDCI and how to proceed if you need to replace it. As shown, the val…
How do you disassemble the EGR valve in the Ford Focus 1.6 TDCi?
How do you disassemble the EGR valve in the Ford Focus 1.6 TDCi?
Ford Focus (2011-2018 / MK 3) The EGR valve is a device installed in car engines, with the purpose of recovering a percentage of exhaust gases and injecting them into the intake m…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos