Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Where is the EGR valve located in the Ford Focus 1.6 TDCI?

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: EGR valve
Operation: Where is the EGR valve located in the Ford Focus 1.6 TDCI?

In this video, we can see where the EGR valve is located in the Ford Focus 1.6 TDCI and how to proceed in case we need to replace it. As shown, the valve in question is located in the rear left area of the engine, looking at the vehicle from the front. Before proceeding with disassembly, make sure that the engine is cool enough to operate safely. We start by removing the top plate of the diesel filter, then we remove both it and its mounting bracket. Finally, we disconnect the valve collectors, unscrew the two bolts, and separate it from the engine.


Posted on 16 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - How much is the EGR valve on the Ford Focus 1.6 TDCi 90 PS? Read Answer
    • Focus 2018-2025 - What problems with the EGR valve on the Ford Focus 1 6 tdci? Read Answer
    • Focus 2004-2011 - What to do in case of Ford Focus 1.6 TDCi EGR valve problems? Read Answer
    • Focus 2011-2018 - What is the price of the EGR valve of the Ford Focus C Max 1.6 TDCI? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos