Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Fuel Filter on Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Fuel filter

Let’s see how to replace the fuel filter on a Ford Focus. The filter is located under the car floor, so lift the car with a jack. Disconnect the wires and various hoses from the fuel filter, then unscrew the fixing screws located near the container where the filter is situated. Once the filter is removed, take it out of the vehicle (replace it with a new filter). Fit the new fuel filter under the car floor: reconnect the hoses and electrical wires, and tighten the screws. Lower the car and start the vehicle for a functionality test. Replace the filter with a new one of the same size.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the diesel filter of the Ford Focus 1.6 TDCi
Replacement of the diesel filter of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show us how to disassemble and replace the diesel filter of the Ford Focus 1.6 TDCi. First, we open the hood of the car and …
How do you replace the diesel filter of the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) The procedure for replacing the diesel filter on the Ford Focus involves opening the hood, so that it is possible to access the components located in…
How do you replace the diesel fuel filter of the Ford Focus?
How do you replace the diesel fuel filter of the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In order to replace the diesel filter of the Ford Focus, you need to open the hood so that you can access the components inside the engine compartmen…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos