Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to remove the Ford Focus 1.5 TDCI diesel filter

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Diesel filter
Operation: How to remove the Ford Focus 1.5 TDCI diesel filter

Let's see in this guide how to remove and replace the Ford Focus 1.5 TDCI diesel filter, following the instructions below. First we open the bonnet and start by disconnecting our battery; after which we unscrew the screws of the fuel filter bracket, using a ratchet wrench, then disconnecting the fuel pipes and the electrical connector. At this point we use a 27 mm socket wrench to unscrew the diesel filter; remove the cartridge and replace it with the new one, with the original spare, following the video to the end!


Posted on 10 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - How much does it cost to replace the diesel filter on the Ford Focus 1.6 tdci? Read Answer
    • Focus 2004-2011 - How often should the Ford Focus diesel filter be changed? Read Answer
    • Focus 2004-2011 - How much does the Ford Focus fuel filter cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos