Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Ford Focus MK3 2.0 TDCi

Model: Ford Focus MK 3 - Years 2011-2018
Part: Diesel fuel filter

This video provides instructions for removing and replacing the fuel filter on a Ford Focus MK3 2.0 TDCi in simple steps. First, open the bonnet of your car and locate the fuel filter on the left; then remove the upper plastic cover and unscrew the side fixing screws of the filter, disconnecting the electrical connector of the sensor. At this point, disconnect the fuel pipe and remove the filter, replacing it with the new one; then apply the reverse procedure for reassembly!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Ford Focus 1.5 TDCI
How to Replace the Fuel Filter on a Ford Focus 1.5 TDCI
Ford Focus (2011-2018 / MK 3) This guide briefly explains the steps to remove and replace the fuel filter on a Ford Focus 1.5 TDCI. First, open the engine bonnet and locate the fu…
How to Remove the Diesel Filter from the Ford Focus 1.5 TDCI
How to Remove the Diesel Filter from the Ford Focus 1.5 TDCI
Ford Focus (2011-2018 / MK 3) This guide shows you how to remove and replace the diesel filter on the Ford Focus 1.5 TDCI, following the instructions below. First, open the bonnet…
Replacing the Diesel Filter on the Ford Focus MK3 1.5 TDCI
Replacing the Diesel Filter on the Ford Focus MK3 1.5 TDCI
Ford Focus (2011-2018 / MK 3) Discover in this video how to remove and replace the diesel filter on the Ford Focus third generation, with a 1.5 TDCI engine. First, open the bonnet…

    Frequently Asked Questions

    • Focus 2004-2011 - How much does it cost to replace the diesel filter on the Ford Focus 1.6 tdci? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos